• Telephone: +91 422 2647910  /   Mobile: +91 9345121945

  • >
  • How to Use - Electric Tawa

How to Use - Electric Tawa


Insert the thermostat carefully and gently into the appliance till it butts with the heater ends as shown . Do not use excessive force. Now insert the plug into an electrical socket and switch on.


Adjust the thermostat knob to the desired temperature setting as shown. The indicator light will start glowing. Wait till the light goes off. Now the appliance is ready for use. You can vary the temperature by adjusting the knob as required.


After cooking switch the main off and remove the plug. Allow the appliance to cool down. Remove the thermostat by gently pulling it outside as shown.


Lift the Diecast Tawa Plate as shown to detach from the outer cover. Wipe with a cloth or sponge or wash in water if required. Do not use scouring pads, powders etc., Allow to dry if washed in water.


Place the Tawa plate in position on the plastic outer cover as shown and press down gently till you feel the locking. Now as shown in the beginning insert the thermostat and the appliance is ready for use. We have designed the appliance for ease of use and maintenance. Unlike other ets such as hot plates etc., your "Chefmaster" - Electric Tawa's cooking Surface is designed in such a manner that it can be removed from the base unit and wipe cleaned or washed in water. After cleaning or washing and drying it can be refitted with ease back in position.


Copyrights © 2015 Premier Industrial Corporation.

Design by Krithi

Back To Top